|
| |
IC-M802 General version
|
|---|
| Frequency range | Tx |
1.6–2.9999 MHz
4.0–4.9999 MHz
6.0–6.9999 MHz
8.0–8.9999 MHz
12.0–13.9999 MHz
16.0–17.9999 MHz
18.0–19.9999 MHz
22.0–22.9999 MHz
25.0–27.5000 MHz |
|---|
| Rx |
0.5–29.9999 MHz |
|---|
| Power supply requirement |
13.6V DC ±15% (negative ground) |
|---|
Dimensions (W×H×D)
(Projections not included) |
Main unit:
240×94×238.4 mm;
97/16×311/16×93/8 in
Controller unit:
220×110×84.4 mm;
821/32×411/32×35/16 in |
|---|
| Weight (approx.) |
Main unit:
4.7kg; 10.4lb,
Controller unit:
570g; 1.3lb |
|---|
| Current drain (approx.) | Transmit (High) |
30A typ. at max. power |
|---|
| Max. audio output |
3.0A |
|---|
| Sensitivity | J3E, A1A, J2B, F1B
(at 10dB S/N; 1.8–29.999MHz) |
0.5μV |
|---|
H3E
(at 10dB S/N; 1.8–3.999MHz) |
3.2μV |
|---|
| Selectivity | J3E, R3E, J2B, A1A |
2.4kHz/–6dB
3.6kHz/–60dB |
|---|
| Audio output power (10% dist/ 4Ω load) |
4.0W |
|---|
RF output power (PEP)
(output power differs depending on version) |
150/60/20W |
|---|
|
GENERAL
| |
IC-F61M
|
|---|
| Frequency range |
457.525–467.575MHz
|
|---|
| Number of operating channels |
9 UHF onboard channels (25kHz channel) |
|---|
| Channel spacing |
25kHz |
|---|
Current drain
(at 7.2V DC) | Tx | 2W ERP output |
1.0A |
|---|
| 0.2W ERP output |
0.4A |
|---|
| Rx | AF Max. |
500mA (Internal SP)
300mA (External SP) |
|---|
| Stand-by |
85mA |
|---|
| Operating temp. range |
–20°C to +55°C |
|---|
Dimensions
(projections not included; W×H×D) |
56×97×36.4 mm |
|---|
| Weight (approx.) |
284g (with BP-227) |
|---|
TRANSMITTER
| |
IC-F61M
|
|---|
| Output power |
2W ERP/0.2W ERP |
|---|
| Spurious emissions |
0.25μW |
|---|
| Adjacent channel power |
70dB |
|---|
RECEIVER
| |
IC-F61M
|
|---|
| Sensitivity (at 20dB SINAD) |
–4dBμ typ. emf |
|---|
| Adjacent Ch. selectivity |
73dB typ. |
|---|
| Spurious response |
70dB |
|---|
| Intermodulation rejection |
70dB typ. |
|---|
Audio output power
(at 5% dist. with an 8Ω load) | Internal speaker |
0.7W typ. |
|---|
| External speaker |
0.5W typ. |
|---|
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 F
Method, Proc. |
|---|
| Low Pressure Storage |
500.4 I |
|---|
| Low Pressure Operation |
500.4 II |
|---|
| High Temperature Storage |
501.4 I |
|---|
| High Temperature Operation |
501.4 II |
|---|
| Low Temperature Storage |
502.4 I |
|---|
| Low Temperature Operation |
502.4 II |
|---|
| Temperature Shock |
503.4 I |
|---|
| Solar Radiation |
505.4 I |
|---|
| Rain Blowing |
506.4 I |
|---|
| Rain Drip |
506.4 III |
|---|
| Humidity Induced |
507.4 |
|---|
| Salt Fog |
509.4 |
|---|
| Dust Blowing |
510.4 I |
|---|
| Vibration |
514.5 I |
|---|
| Shock Functional |
516.5 I |
|---|
| Shock Transit Drop |
516.5 IV |
|---|
Also meets equivalent MIL-STD-810-C, -D and -E.
Ingress Protection Standard
| Dust and Water |
IP67(Dust-tight and waterproof protection) |
|---|
|
